softetherのSlackBuildを作ってみました
開始してから、すっかり放置してしまいましたが…
月も変わったし、これから気分変えて臨みます。
以前耳にしたことのあったSoftEther VPN プロジェクト - SoftEther VPN プロジェクトがオープンソースになていたので、slackware系でビルドできるようにSlackBuild Scripts - SlackWikiっぽいのを作ってみました。debianパッッケージを公開したページもあったので。
ちなみに作業・動作確認環境はWindows 7上のvmware player上のSalixです。
以下の内容を適当な場所で「softether.SlackBuild」として保存して、実行してください。
#!/bin/sh # Slackware build script for <softether> # Copyright <2014> <msiz> <Japan> # All rights reserved. # # Redistribution and use of this script, with or without modification, is # permitted provided that the following conditions are met: # # 1. Redistributions of this script must retain the above copyright # notice, this list of conditions and the following disclaimer. # # THIS SOFTWARE IS PROVIDED BY THE AUTHOR "AS IS" AND ANY EXPRESS OR IMPLIED # WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF # MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO # EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, # SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, # PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; # OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, # WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR # OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. PRGNAM=softether # replace with name of program VERSION=${VERSION:-4.04-9412} # replace with version of program PKGVERSION=${PKGVERSION:-4.04_9412} # "-" within ver has side-effects BUILD=${BUILD:-1} TAG=${TAG:-_msiz} # the "_SBo" is required PKGTYPE=${PKGTYPE:-txz} # Automatically determine the architecture we're building on: if [ -z "$ARCH" ]; then case "$( uname -m )" in i?86) ARCH=i486 ;; arm*) ARCH=arm ;; # Unless $ARCH is already set, use uname -m for all other archs: *) ARCH=$( uname -m ) ;; esac fi CWD=$(pwd) SRCTAR="http://jp.softether-download.com/files/softether/v4.04-9412-rtm-2014.01.15-tree/Source%20Code/softether-src-v${VERSION}-rtm.tar.gz" if [ ! -e `basename $SRCTAR` ] ; then if which wget > /dev/null 2>&1 ; then wget $SRCTAR elif which curl > /dev/null 2>&1 ; then curl -O $SRCTAR else echo "wget or curl is required to download source archive." exit 1 fi fi TMP=${TMP:-/tmp/SBo} # For consistency's sake, use this PKG=$TMP/package-$PRGNAM OUTPUT=${OUTPUT:-/tmp} # Drop the package in /tmp if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" LIBDIRSUFFIX="" elif [ "$ARCH" = "i686" ]; then SLKCFLAGS="-O2 -march=i686 -mtune=i686" LIBDIRSUFFIX="" elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" else SLKCFLAGS="-O2" LIBDIRSUFFIX="" fi set -e # Exit on most errors # If you prefer to do selective error checking with # command || exit 1 # then that's also acceptable. rm -rf $PKG mkdir -p $TMP $PKG $OUTPUT cd $TMP rm -rf $PRGNAM-$VERSION #tar xvf $CWD/$PRGNAM-$VERSION.tar.gz tar xvf $CWD/`basename $SRCTAR` mv v$VERSION $PRGNAM-$VERSION cd $PRGNAM-$VERSION chown -R root:root . find -L . \ \( -perm 777 -o -perm 775 -o -perm 750 -o -perm 711 -o -perm 555 \ -o -perm 511 \) -exec chmod 755 {} \; -o \ \( -perm 666 -o -perm 664 -o -perm 640 -o -perm 600 -o -perm 444 \ -o -perm 440 -o -perm 400 \) -exec chmod 644 {} \; # Your application will probably need different configure flags; # these are provided as an example only. # Be sure to build only shared libraries unless there's some need for # static. #CFLAGS="$SLKCFLAGS" \ #CXXFLAGS="$SLKCFLAGS" \ #./configure \ # --prefix=/usr \ # --libdir=/usr/lib${LIBDIRSUFFIX} \ # --sysconfdir=/etc \ # --localstatedir=/var \ # --mandir=/usr/man \ # --docdir=/usr/doc/$PRGNAM-$VERSION \ # --build=$ARCH-slackware-linux # Compile the application and install it into the $PKG directory if [ "$ARCH" = "x86_64" ]; then MAKFILE=linux_64bit.mak else MAKFILE=linux_32bit.mak fi cp src/makefiles/${MAKFILE} ./Makefile sed -i.bkp -e '/^INSTALL_BINDIR/i DESTDIR = ' Makefile sed -i.bkp2 -e 's/mkdir -p \$(INSTALL_/mkdir -p $(DESTDIR)$(INSTALL_/g' Makefile sed -i.bkp3 -e 's/\(cp [^\$]\+\)\$(INSTALL_/\1$(DESTDIR)$(INSTALL_/g' Makefile sed -i.bkp4 -e 's/\(echo .\+\)> \$(INSTALL_/\1> $(DESTDIR)$(INSTALL_/g' Makefile sed -i.bkp5 -e 's/\(chmod [^\$]\+\)\$(INSTALL_/\1$(DESTDIR)$(INSTALL_/g' Makefile if which clang 2> /dev/null >&1 ; then CC=clang else CC=gcc fi #CC="$CC" \ #CFLAGS="$SLKCFLAGS" \ #CXXFLAGS="$SLKCFLAGS" \ make CC=$CC mkdir -p $PKG/usr/bin make install DESTDIR=$PKG/ # Strip binaries and libraries - this can be done with 'make install-strip' # in many source trees, and that's usually acceptable if so, but if not, # use this: find $PKG -print0 | xargs -0 file | grep -e "executable" -e "shared object" | grep ELF \ | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true # Compress man pages # If the man pages are installed to /usr/share/man instead, you'll need to either # add the --mandir=/usr/man flag to configure or move them manually after the # make install process is run. if [ -e $PKG/usr/man ]; then find $PKG/usr/man -type f -exec gzip -9 {} \; for i in $( find $PKG/usr/man -type l ) ; do ln -s $( readlink $i ).gz $i.gz ; rm $i ; done fi # Compress info pages and remove the package's dir file # If no info pages are installed by the software, don't leave this in the script if [ -e $PKG/usr/info/dir ]; then rm -f $PKG/usr/info/dir gzip -9 $PKG/usr/info/*.info* fi # Remove perllocal.pod and other special files that don't need to be installed, # as they will overwrite what's already on the system. If this is not needed, # remove it from the script. # Remove 'special' files find $PKG -name perllocal.pod \ -o -name ".packlist" \ -o -name "*.bs" \ | xargs rm -f # Copy program documentation into the package # The included documentation varies from one application to another, so be sure # to adjust your script as needed # Also, include the SlackBuild script in the documentation directory mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION cp -a \ AUTHORS.TXT BUILD_WINDOWS.TXT LICENSE THIRD_PARTY.TXT \ BUILD_UNIX.TXT ChangeLog README WARNING.TXT \ $PKG/usr/doc/$PRGNAM-$VERSION cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild # Copy the slack-desc (and a custom doinst.sh if necessary) into ./install mkdir -p $PKG/install #cat $CWD/slack-desc > $PKG/install/slack-desc #cat $CWD/doinst.sh > $PKG/install/doinst.sh cat > $PKG/install/slack-desc <<END_OF_SLACK_DESC # HOW TO EDIT THIS FILE: # The "handy ruler" below makes it easier to edit a package description. Line # up the first '|' above the ':' following the base package name, and the '|' # on the right side marks the last column you can put a character in. You must # make exactly 11 lines for the formatting to be correct. It's also customary # to leave one space after the ':'. |-----handy-ruler------------------------------------------------| softether: An Open-Source Cross-platform Multi-protocol VPN Program softether: softether: SoftEther VPN is developed by SoftEther VPN Project at softether: University of Tsukuba. Department of Computer Science has softether: dozens of overly-enthusiastic geeks. softether: softether: softether: softether: softether: END_OF_SLACK_DESC # Make the package; be sure to leave it in $OUTPUT # If package symlinks need to be created during install *before* # your custom contents of doinst.sh runs, then add the -p switch to # the makepkg command below -- see makepkg(8) for details cd $PKG /sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$PKGVERSION-$ARCH-$BUILD$TAG.$PKGTYPE
個人的には、fakerootを使うのがお勧め。
fakerootが使えるなら、こんな感じで実行すると、「/tmp/softoether...」というslackwareのパッケージができるはずです。
fakeroot sh -x ./softether.SlackBuild
誰かの役に立てばいいなぁと。